Easiest way to install conceret façade panels
The installation of concrete facade panels has been steadily increasing over the last few years as an alternative to conventional brickwork and paving. Concrete facades are a perfect solution for commercial and residential properties looking to add character to their exterior appeal. They are also the preferred choice by many carpenters and contractors due to their durability and cost-effectiveness. However, in case of emergency, you may have to deal with power surges or sudden weather conditions that could damage your concrete facade panels. It is why it is best to call in professionals right away if you notice any damage to your panels.
A lot of people have used concrete facade panels as decorative elements for many years. However, as these panels are now starting to show their age, you must know how to deal with them to prolong their life span. There are two ways to deal with damage in concrete facade panels - replace them or repair them. The latter would be preferred since it costs less than replacing the panels. Here are some tips that can help you make the right decision if you've got damaged panels:
If the panel has rusted or splintered, you should first try to determine if it can be repaired using a cement-based mixture. In most cases, it can. Just make sure to read through the recipe before attempting to mix it. Once you're positive that this composite will work for your concrete facade, apply it on the affected panel using an adhesive. If the damage caused by the rusted panel is extensive, you might need to remove it entirely and replace it with a new one. For those without splintered panels, you can also cover them with PVC tubing or rebar and tie it securely to the panels.
If the panel has severely cracked, the best thing you can do at this point is to repair it or replace it entirely. There are two options to choose from here. The first one is to fix the whole facade, including the moldings. The second option is to replace the cracked panels with new ones. Both methods have their pros and cons, so you'll have to weigh your priorities carefully.
For those with damaged concrete facades, there's another way to handle the situation. This method involves painting over the damaged area, again using cement-based adhesive. Make sure to prepare all surfaces beforehand by covering them with masking tape and sanding them thoroughly. Once you're done sanding, apply primer to the concrete face and let it dry overnight.
Painting concrete facade panels will also prevent future damage to the area. However, to protect these panels from damage, the best thing to do is cover them with polyethylene plastic first. Keep in mind that the adhesive used for this step will most likely shrink as time passes, so it's essential to cover all exposed surfaces with PT. The plastic color will vary according to the panel's tint, so you have to choose a color that won't fade.
When it comes to repainting damaged panels, keep in mind that it's always best to start from the bottom, and work your way up. Start with a clean surface and cover all exposed areas with PT. Use polyethylene spacers between panels to prevent cracks from spreading. It should keep any spilled materials from staining the newly painted surface.
When it comes to repainting damaged panels, make sure you have enough time to prepare the surface. Most experts recommend that concrete facades should be repainted every ten years to avoid fading. But if you need it sooner, it's still better to prepare earlier to prevent further damage to the area. You can still use polyethylene-based adhesive even after the concrete has dried, but it's always best to prepare early to give the surface a good bonding base.